Minimum 20,000 pounds lifting and dumping capacity with the gross weight evenly distributed on
Hook lift shall be able to handle sub frame mounted bodies with potential lengths of 12’ – 18’ with
the optimum body length being 14’ – 16’. Bodies shorter than 14’ will require the use of a shelf
assembly. Position of the shelf assembly will impact how short of a body can be transported.
Minimum lifting and dumping capacity (20,000#) of the hook lift hoist must be achieved for all stated
body lengths and specified hook heights.
Hook lift hoist shall have a minimum of 57 degree dump angle.
Hook lift hoist (fixed jib 35-5/8” hook height) not to exceed 2,720 pounds.
Hook lift hoist (adjustable jib 35-5/8” or 53-7/8” hook height) not to exceed 2,860 pounds.
Sub frame mounted bodies shall be supported with a pair of 7-1/4” minimum diameter outside
flanged rollers at the rear of the hoist, and be adjustable to accommodate bodies with outside sub
frame rail widths of 40-1/2” or 41-5/8”.
The hook to rear roller dimension to be 153.63” in length.
Hook lift shall be capable of being mounted to a truck chassis with an “effective” cab-to-axle of 120”
- 138” with 138” being the optimum dimension for weight distribution and stability.